1/8 Meg Nozzle; 40 Degree For Pressure Washers 1/8 Meg Nozzle 40 For Pressure Washers
40 degree eighth meg nozzle for pressure washers from $7.20

40 Degree 1/8" Meg Stainless Steel Nozzles Our stainless steel 40 degree 1/8" Meg tips can be used in surface cleaners, Duct Spinners and other pressure washing accessories that use 1/8" meg nozzles. These nozzles are also available in 25 degree spray patterns that deliver precision accuracy and powerful impact for reliable cleaning power on a variety of hard surfaces. A high-impact spray pattern means more impact per unit area and faster wash times. MEG spray nozzles are made with hardened stainless steel that is ideal for high-pressure use and has a long wear life. They have an internal e vane that stabilizes vibrations and provides a uniform spray distribution. These MEG tips have a 1/8" NPT inlet, a maximum pressure of 5000 PSI and various spray patterns. Size: 1/8" male NPT" Details: Spray pattern: 40 degree Maximum pressure: 5000 PSI Material: Hardened stainless steel Pressure wash spray nozzles are really an integral part of your power wash system. Nozzles come in different shapes, sizes, and styles. Nozzles should have a number that is stamped on the nozzle, which indicates the spray angle and orifice size.  The first two digits of the nozzle number indicate the spray angle (disperse) in degrees. The remaining numbers refer to the orifice size (hole).When replacing your tips it's important that you know the GPM and PSI of your machine. Too small and you could potentially damage your machine's pump. Too large and you will not get optimal pressure. Use the nozzle chart to find the correct size.

1/8 Meg Nozzle; 25 Degree For Pressure Washers 1/8 Meg Nozzle 25 For Pressure Washers
25 degree eighth meg nozzle for pressure washers from $7.20

25 Degree 1/8" Meg Stainless Steel Nozzles Our stainless steel 25 degree 1/8" Meg tips can be used in surface cleaners, Duct Spinners and other pressure washing accessories that use 1/8" meg nozzles. These nozzles are also available in 40 degree spray patterns that deliver precision accuracy and powerful impact for reliable cleaning power on a variety of hard surfaces. A high-impact spray pattern means more impact per unit area and faster wash times. MEG spray nozzles are made with hardened stainless steel that is ideal for high-pressure use and has a long wear life. They have an internal e vane that stabilizes vibrations and provides a uniform spray distribution. These MEG tips have a 1/8" NPT inlet, a maximum pressure of 5000 PSI and various spray patterns. Size: 1/8" male NPT" Details: Spray pattern: 25 degree Maximum pressure: 5000 PSI Material: Hardened stainless steel Pressure wash spray nozzles are really an integral part of your power wash system. Nozzles come in different shapes, sizes, and styles. Nozzles should have a number that is stamped on the nozzle, which indicates the spray angle and orifice size.  The first two digits of the nozzle number indicate the spray angle (disperse) in degrees. The remaining numbers refer to the orifice size (hole).When replacing your tips it's important that you know the GPM and PSI of your machine. Too small and you could potentially damage your machine's pump. Too large and you will not get optimal pressure. Use the nozzle chart to find the correct size.

Quarter Meg Nozzle 0 Degree Spray Pattern 0 1/4 Meg Nozzle For Pressure Washers
0 degree quarter meg nozzle for pressure washers Sale Price: $7.20

0 degree 1/4" Stainless Steel Meg Nozzles Our 0 degree stainless steel Meg tips can be used in surface cleaners, Duct Spinners and other pressure washing accessories that use 1/4" meg nozzles. These nozzles are also available in 0, 15, 25 and 40 degree spray patterns that deliver precision accuracy and powerful impact for reliable cleaning power on a variety of hard surfaces. A high-impact spray pattern means more impact per unit area and faster wash times. MEG spray nozzles are made with hardened stainless steel that is ideal for high-pressure use and has a long wear life. They have an internal e vane that stabilizes vibrations and provides a uniform spray distribution. These MEG tips have a 1/4" NPT inlet, a maximum pressure of 5000 PSI and various spray patterns. Size: Inlet: 1/4" male NPT Length: 7/8" Hex: 1/2" Details: Spray pattern: 0, 15, 25 and 40 degree Maximum pressure: 5000 PSI Material: Hardened stainless steel Pressure wash spray nozzles are really an integral part of your power wash system. Nozzles come in different shapes, sizes, and styles. Nozzles should have a number that is stamped on the nozzle, which indicates the spray angle and orifice size.  The first two digits of the nozzle number indicate the spray angle (disperse) in degrees. The remaining numbers refer to the orifice size (hole).When replacing your tips it's important that you know the GPM and PSI of your machine. Too small and you could potentially damage your machine's pump. Too large and you will not get optimal pressure. Use the nozzle chart to find the correct size.

Nozzle 1/4 Meg 15 Degree Spray Pattern Nozzle 1/4 Meg 15 For Pressure Washers
15 degree quarter meg nozzle for pressure washers Sale Price: $7.20

15 degree 1/4" Stainless Steel Meg Nozzles Our 15 degree stainless steel Meg tips can be used in surface cleaners, Duct Spinners and other pressure washing accessories that use 1/4" meg nozzles. These nozzles are also available in 0, 15, 25 and 40 degree spray patterns that deliver precision accuracy and powerful impact for reliable cleaning power on a variety of hard surfaces. A high-impact spray pattern means more impact per unit area and faster wash times. MEG spray nozzles are made with hardened stainless steel that is ideal for high-pressure use and has a long wear life. They have an internal e vane that stabilizes vibrations and provides a uniform spray distribution. These MEG tips have a 1/4" NPT inlet, a maximum pressure of 5000 PSI and various spray patterns. Size: Inlet: 1/4" male NPT Length: 7/8" Hex: 1/2" Details: Spray pattern: 15 degree Maximum pressure: 5000 PSI Material: Hardened stainless steel Pressure wash spray nozzles are really an integral part of your power wash system. Nozzles come in different shapes, sizes, and styles. Nozzles should have a number that is stamped on the nozzle, which indicates the spray angle and orifice size.  The first two digits of the nozzle number indicate the spray angle (disperse) in degrees. The remaining numbers refer to the orifice size (hole).When replacing your tips it's important that you know the GPM and PSI of your machine. Too small and you could potentially damage your machine's pump. Too large and you will not get optimal pressure. Use the nozzle chart to find the correct size.

Nozzle 1/4 Meg 40 Degree For Pressure Washers Nozzle 1/4 Meg 40 For Pressure Washers
40 degree quarter meg nozzle for pressure washers Sale Price: $7.20

40 degree 1/4" Stainless Steel Meg Nozzles Our 40 degree stainless steel Meg tips can be used in surface cleaners, Duct Spinners and other pressure washing accessories that use 1/4" meg nozzles. These nozzles are also available in 0, 15, 25 and 40 degree spray patterns that deliver precision accuracy and powerful impact for reliable cleaning power on a variety of hard surfaces. A high-impact spray pattern means more impact per unit area and faster wash times. MEG spray nozzles are made with hardened stainless steel that is ideal for high-pressure use and has a long wear life. They have an internal e vane that stabilizes vibrations and provides a uniform spray distribution. These MEG tips have a 1/4" NPT inlet, a maximum pressure of 5000 PSI and various spray patterns. Size: Inlet: 1/4" male NPT Length: 7/8" Hex: 1/2" Details: Spray pattern: 40 degree Maximum pressure: 5000 PSI Material: Hardened stainless steel Pressure wash spray nozzles are really an integral part of your power wash system. Nozzles come in different shapes, sizes, and styles. Nozzles should have a number that is stamped on the nozzle, which indicates the spray angle and orifice size.  The first two digits of the nozzle number indicate the spray angle (disperse) in degrees. The remaining numbers refer to the orifice size (hole).When replacing your tips it's important that you know the GPM and PSI of your machine. Too small and you could potentially damage your machine's pump. Too large and you will not get optimal pressure. Use the nozzle chart to find the correct size.

Nozzle 1/4 Meg 25 Degree For Pressure Washers Nozzle 1/4 Meg 25 For Pressure Washers
25 degree quarter meg nozzle for pressure washers Sale Price: $7.20

25 degree 1/4" Stainless Steel Meg Nozzles Our 25 degree stainless steel Meg tips can be used in surface cleaners, Duct Spinners and other pressure washing accessories that use 1/4" meg nozzles. These nozzles are also available in 0, 15, 25 and 40 degree spray patterns that deliver precision accuracy and powerful impact for reliable cleaning power on a variety of hard surfaces. A high-impact spray pattern means more impact per unit area and faster wash times. MEG spray nozzles are made with hardened stainless steel that is ideal for high-pressure use and has a long wear life. They have an internal e vane that stabilizes vibrations and provides a uniform spray distribution. These MEG tips have a 1/4" NPT inlet, a maximum pressure of 5000 PSI and various spray patterns. Size: Inlet: 1/4" male NPT Length: 7/8" Hex: 1/2" Details: Spray pattern: 25 degree Maximum pressure: 5000 PSI Material: Hardened stainless steel Pressure wash spray nozzles are really an integral part of your power wash system. Nozzles come in different shapes, sizes, and styles. Nozzles should have a number that is stamped on the nozzle, which indicates the spray angle and orifice size.  The first two digits of the nozzle number indicate the spray angle (disperse) in degrees. The remaining numbers refer to the orifice size (hole).When replacing your tips it's important that you know the GPM and PSI of your machine. Too small and you could potentially damage your machine's pump. Too large and you will not get optimal pressure. Use the nozzle chart to find the correct size.

J Rod Nozzle Holder
J-ROD Nozzle Holder Sale Price: $22.78

Just add your own 1/4 MEG nozzles to this holder and you can change from one to another in a snap! No more carrying nozzles around in your pocket.

Nozzle Unclogger Tool For Pressure Washer Nozzles
Nozzle Unclogger Tool Sale Price: $6.59

Quality nozzle unclogger with protective screw cap. Constructed of brass and has a 1/4 QC plug base. Quickly cleans material from nozzle orifice, extending the nozzle life.

1/4 Meg Soaper Nozzle 65 40 For Pressure Washers
Quarter Meg Soaper Nozzle 65-40 Sale Price: $3.99

Our quarter Meg soap nozzles have an enlarged orifice to create a significant pressure drop in order to activate your downstream chemical injector. If you are not using a chem injector, the soap nozzle can be used as an alternative low-pressure rinse method. This Soap Nozzle has 1/4" M NPT threads and a hardened brass body.The Spraying Systems Brass 1/4" MPT Nozzle is designed for low pressure applications. It is an inexpensive brass alternative to more costly replaceable nozzles.It features a feathered edge for wide coverage, allowing you to apply soap more expediently. It is an excellent choice for low pressure chemical and acid applications. Can be used like a Quick Connect nozzle if screwed into a 1/4" QC plug with FPT (i.e. 1194 or 4602). Brass 1/4" MPT Nozzle, 6540     Maximum Pressure: 700 PSI     Nozzle Size: #40     65° Fan     Feather edge for wide coverage

12

Every nozzle used by pressure washing contractors is rated in two ways - pattern and orifice. The pattern is the "shape" the water takes (15 degree, 25 degree, etc.). The orifice is the diameter of the opening, and that is the most important number to understand. If you buy a pressure wash nozzle with an orifice that is too small, you are choking off your power washer. If you buy an orifice too big, your equipment will not deliver the power it was designed for.

There is a link to a Nozzle Chart below. Feel free to print this for your future reference.

First locate the PSI of your machine along the top line. Once you have found that column, run your finger down the column to the APPROXIMATE gallons-per-minute of your pressure washer. Once you have found the closest number, move your finger out to the left-hand column and see the recommended orifice size.

Once you know the proper orifice size for your machine, you can reduce the output pressure simply by increasing the orifice size. To do that, locate the PSI you want to achieve. Once you have found that column, run your finger down to the APPROXIMATE gallons-per-minute of your pressure washer. Once you have found that, simply move your finger to the left hand column and see what orifice size will give you the pressure output you want.