Powerhouse Powerhouse
powerhouse Sale Price: $59.99

1/8 Meg Nozzle; 25 Degree For Pressure Washers 1/8 Meg Nozzle 25 For Pressure Washers
25 degree eighth meg nozzle for pressure washers from $7.20

25 Degree 1/8" Meg Stainless Steel Nozzles Our stainless steel 25 degree 1/8" Meg tips can be used in surface cleaners, Duct Spinners and other pressure washing accessories that use 1/8" meg nozzles. These nozzles are also available in 40 degree spray patterns that deliver precision accuracy and powerful impact for reliable cleaning power on a variety of hard surfaces. A high-impact spray pattern means more impact per unit area and faster wash times. MEG spray nozzles are made with hardened stainless steel that is ideal for high-pressure use and has a long wear life. They have an internal e vane that stabilizes vibrations and provides a uniform spray distribution. These MEG tips have a 1/8" NPT inlet, a maximum pressure of 5000 PSI and various spray patterns. Size: 1/8" male NPT" Details: Spray pattern: 25 degree Maximum pressure: 5000 PSI Material: Hardened stainless steel Pressure wash spray nozzles are really an integral part of your power wash system. Nozzles come in different shapes, sizes, and styles. Nozzles should have a number that is stamped on the nozzle, which indicates the spray angle and orifice size.  The first two digits of the nozzle number indicate the spray angle (disperse) in degrees. The remaining numbers refer to the orifice size (hole).When replacing your tips it's important that you know the GPM and PSI of your machine. Too small and you could potentially damage your machine's pump. Too large and you will not get optimal pressure. Use the nozzle chart to find the correct size.

1/8 Meg Nozzle; 40 Degree For Pressure Washers 1/8 Meg Nozzle 40 For Pressure Washers
40 degree eighth meg nozzle for pressure washers from $7.20

40 Degree 1/8" Meg Stainless Steel Nozzles Our stainless steel 40 degree 1/8" Meg tips can be used in surface cleaners, Duct Spinners and other pressure washing accessories that use 1/8" meg nozzles. These nozzles are also available in 25 degree spray patterns that deliver precision accuracy and powerful impact for reliable cleaning power on a variety of hard surfaces. A high-impact spray pattern means more impact per unit area and faster wash times. MEG spray nozzles are made with hardened stainless steel that is ideal for high-pressure use and has a long wear life. They have an internal e vane that stabilizes vibrations and provides a uniform spray distribution. These MEG tips have a 1/8" NPT inlet, a maximum pressure of 5000 PSI and various spray patterns. Size: 1/8" male NPT" Details: Spray pattern: 40 degree Maximum pressure: 5000 PSI Material: Hardened stainless steel Pressure wash spray nozzles are really an integral part of your power wash system. Nozzles come in different shapes, sizes, and styles. Nozzles should have a number that is stamped on the nozzle, which indicates the spray angle and orifice size.  The first two digits of the nozzle number indicate the spray angle (disperse) in degrees. The remaining numbers refer to the orifice size (hole).When replacing your tips it's important that you know the GPM and PSI of your machine. Too small and you could potentially damage your machine's pump. Too large and you will not get optimal pressure. Use the nozzle chart to find the correct size.

Tuff Hyde 100 Gray Non Marking 4000 Psi 1 Wire Hose
Tuff-Hyde 100' Gray Non-Marking 4000 PSI 1-Wire Hose Sale Price: $118.63

R-1 with bend protectors, one fixed end and one swivel end. Rated for up to 310°. Compare at $125 to $175!

Whirl A Way Flat Surface Concrete Cleaner Be 2000wawy
Whirl-A-Way Flat Surface Concrete Cleaner BE #2000WAWY Sale Price: $459.00

On Sale For A Limited Time - While Supplies Last! Click here to read the manual for all BE flat surface cleaners. 20" BE Pressure Supply Flat Surface Cleaner features: 4000 PSI Max Temp 180øF 8.0 GPM 20" Diameter Uses the BE Pressure heavy-duty, contractor rated swivel. Durable lightweight polyethylene yellow dome. Nylon brush safety skirt 2 Arm design Trigger Gun Inlet: 3/8 QC Plug Hover action won?t mar aggregate, pavers, or stamped concrete Pressure washer surface cleaners are powerful and reliable tools for getting the job done faster with fewer mistakes. They are used for high pressure cleaning of driveways, concrete floors, parking lots, roofs, warehouses, shuffleboard courts, outdoor basketball courts, boat ramps, garage floors, boat decks, and more. The benefits of using these tools are clear: 1) faster; takes a lot less time to do the job. 2) easier; takes a lot less effort to accomplish great results 3) cheaper; durable tool cuts labor cost and lasts a long time ? an excellent investment which pays you back quickly 4) better; produces visibly cleaner and more consistently even cleaning of surfaces. Eliminates streaking. USES: Removing rust flakes, deposits, algae and other contaminants from driveways, cleaning drive-through pads, dumpster pads, boat ramps, tennis courts, roofs, pools, decks , walkways, factory floors, docks, loading docks, and almost any other flat surface. Some models are suitable for indoor use in restaurants, saunas, public restrooms, industrial kitchens, and other areas where cleanliness is highly valued. GENERAL DESCRIPTION: Use with cold or hot water. Circular design allows cleaning right up to walls. Flat surface cleaners use 2 or 3 arms that spin up to 2000 RPM (revolutions per minute). At the end of each arm you will find a 1/4? spray nozzle that will clean a path from 8? to 36? wide (depending on which surface cleaner you use). These tools can remove dirt as much as 12 times faster than using a standard wand. Using this machine is simple. You walk behind the unit, moving it from side to side or backwards and forwards over the flat surface. The flow of water is controlled by a pressure washer trigger gun on the handle of the surface cleaner. A scrubbing action results from pressure applied very close to the surface at a slight angle through the nozzles under the dome. You are protected from debris loosened from the surface by the brush skirt or the side of the dome, which contain the high pressure spray under the dome. Effluent (gray water) escapes from under the brush skirt at low pressure. DESIGN: Some models are made with casters. Some are ?floaters? or ?hoverers? that use the pressure to keep the tool riding millimeters above the surface. Some use wheels on axles. All designs make the unit easy to move around. Caster units and floating units move easily from side to side. Axled units are moved forward and back. Since a wide path is covered and overlapped each time, striping and missed spots are virtually eliminated. CAUTION: If the arm strikes any surface while spinning, such as dropping off the side of a sidewalk and hitting the side, damage will result. If at any time you feel vibration when operating a surface cleaner, you should stop using it and inspect or replace the spray arm. Continued operation will result in expensive damage to the bearings in the swivel. If your surface cleaner has a grease fitting on the swivel, be sure to add grease regularly. That will help you get the most life from your swivel. Do not let any surface cleaner sit in one spot on soft surfaces like new concrete or wood. It can scar the surface. Keep a surface cleaner moving at all times. Q: Since there are two nozzles under my surface cleaner, is my pressure cut from 4000PSI to 2000PSI? A: In any pressure system, the pressure stays the same throughout the system. Actually it is your flow that is cut in half, so a 4GPM pressure washer causes each nozzle to put out 2GPM. Q: Does it save water? A: Because the work is done faster, the overall job uses significantly less water. If your pressure washer puts out 4 GPM and you use it for 30 minutes, you are using 120 gallons of water. If the surface cleaner gets the same area clean in just 10 minutes, you are only using 40 gallons. Q: Isn't the brush used to scrub the surface? A: NO! AtteMPTing to agitate the surface with the brush on a floating surface cleaner will just damage the brush and slow you down. Agitation is the result of high pressure. Q: Does this tool require a lot of maintenance? A: As always with any equipment, the better you take care of it the longer it will last. Read the manufacturer's instructions to learn how to maximize the performance and life of the tool. In most cases, adding grease to the swivel weekly is all it takes to make the swivel last for years. Q: How close does it get to walls? A: When the dome is against the wall, the arm spins about ?? of an inch away from the wall inside the dome. Q: Do you need a 4000PSI pressure washer to power a surface cleaner or is a smaller one OK? A: It takes a minimum of 2000 PSI to start an arm moving. The higher the volume and pressure, the faster and more efficient a surface cleaner is. We suggest a minimum of 3000PSI. Any less, and the surface cleaner may not work - and even if it does it won?t be very efficient. Spend money to upgrade your small pressure washer before you buy one of these. Q: Will a surface cleaner remove oil stains and bubble gum stains? A: A surface cleaner will eliminate soil from the surface. It will not eliminate the ghost of stains left deep in any concrete, however. Pre-soaking any soils will help you clean them faster and more deeply, but a shadow is still likely to be left behind.

Copy Of O Rings For Pressure Washer Quick Connect Fittings 25 Pack Copy Of O Rings For Pressure Washer Quick Connect Fittings 25 Pack
O-Rings for pressure washer Quick Connect fittings 25-Pack Sale Price: $13.86

Buy a 25 pack of Buna or Viton O-rings for the quick connects on your pressure washing equipment!  Avoid job delays and leaks while your trying to work by replacing the worn out O-ring in your quick connect fittings. Viton O-rings are recommended for chemical use and for hot water systems because they last longer.  Before replacing your O-rings check out the male Quick Connect fitting to see if it has sharp edges or a ridge which can cut your new O-ring or make it difficult to connect your male and female quick connects.

Nozzle Unclogger Tool For Pressure Washer Nozzles
Nozzle Unclogger Tool Sale Price: $6.59

Quality nozzle unclogger with protective screw cap. Constructed of brass and has a 1/4 QC plug base. Quickly cleans material from nozzle orifice, extending the nozzle life.

Brick Clean Masonry Cleaner Brick Clean Masonry Cleaner
Brick Clean Masonry Cleaner from $77.99

For new construction clean-up, you can't beat new Brick Clean! This STRONG acid-based cleaner is fast on mortar and concrete splashes and is perfect for tool clean-up.Works better and faster than acid alone. Provides the advantage of lifting the splash from the surface with less scrubbing or blasting. Extremely fast when applied through a pressure washer. Powerful cleaner saves time and effort.Works well for attacking all minerals such as rust, calcium, and lime. Attacks red clay stains, so it is great for cleaning off the red clay "splash-up" found on buildings all over the southeast.Works with hot or cold water to renew masonry surfaces effectively and quickly. Concentrated, so it can be down-streamed through your pressure washer. One gallon makes 5, so it costs only about a penny per square foot to use.This product is also available in 30-gallon and 55-gallon drums. Call us for details! Brick Clean Pro Grade Brick Cleaner For Building Restoration Cleaning Masonry Part #94410 5 best prices on pressure washing chemicals equipment & accessories at Sun Brite Supply

O Rings For Pressure Washer Quick Connect Fittings 25 Pack O Rings For Pressure Washer Quick Connect Fittings 25 Pack
O-Rings for pressure washer Quick Connect fittings 25-Pack from $6.55

Buy a 25 pack of Buna or Viton O-rings for the quick connects on your pressure washing equipment!  Avoid job delays and leaks while your trying to work by replacing the worn out O-ring in your quick connect fittings. Viton O-rings are recommended for chemical use and for hot water systems because they last longer.  Before replacing your O-rings check out the male Quick Connect fitting to see if it has sharp edges or a ridge which can cut your new O-ring or make it difficult to connect your male and female quick connects.

Super Wet Wax Super Wet Wax
Super Wet Wax from $29.95

Special Formula enhances sheeting action of water, improves gloss and reduces drying time.

So Soft Water Conditioner
So Soft Water Conditioner Sale Price: $75.00

So Soft Water Conditioner promotes spot free cleaning Use just 1-2 ounces per 50 gallons!

Ready Seal Deck Sealer And Stain Ready Seal Deck Sealer And Stain
Ready Seal Deck Sealer And Stain from $37.20

Ready Seal deck sealer and stain is the most "contractor-friendly" deck sealer for almost any type of wood. It dives deep into dry wood to protect it from the inside. Rainwater cannot penetrate wood treated with Ready Seal. Instead, rain sits on top of the wood and evaporates back into the air. Ready Seal deck sealer and stain is the most "contractor-friendly" deck sealer for almost any type of wood. It dives deep into dry wood to protect it from the inside. Rainwater cannot penetrate wood treated with Ready Seal. Instead, rain sits on top of the wood and evaporates back into the air. The exceptional UV protection in Ready Seal means that wood will not "gray out" during the life of the product. In our own testing, we applied Ready Seal to tennis bleachers that were exposed to full sunlight all day and found that graying was held off for more than 6 years! Because it dives deep into the wood, Ready Seal never forms a coating on top of the wood that has to be removed when you re-treat the deck. It can be applied or re-applied at any time, as long as the wood is thoroughly dry. Available in 8 natural, customer-pleasing, semi-transparent stain colors.

381