1/8 Meg Nozzle 25° Stainless Steel 1/8 Meg Nozzle 25° Stainless Steel
1/8 Meg Nozzle 25° Stainless Steel from $7.20

1/8" Stainless Steel Meg Nozzle 25° Our stainless steel Meg tips provides a solid 25 degree spray pattern that delivers precision accuracy and powerful impact. Reliable cleaning power for a variety of hard surfaces. A high-impact spray pattern means more impact per unit area and faster wash times. MEG spray nozzles are made with hardened stainless steel that is ideal for high-pressure use and has a long wear life. They have an internal e vane that stabilizes vibrations and provides a uniform spray distribution. This MEG tip has a 1/8" NPT inlet, a maximum pressure of 3000 PSI, and a 25° spray pattern. Size: Inlet: 1/8" male NPT Length: 7/8" Hex: 1/2" Details: Spray pattern: 25° Maximum pressure: 3000 PSI Material: Hardened stainless steel Pressure wash spray nozzles are really an integral part of your power wash system. Nozzles come in different shapes, sizes, and styles. Nozzles should have a number that is stamped on the nozzle, which indicates the spray angle and orifice size.  The first two digits of the nozzle number indicate the spray angle (disperse) in degrees. The remaining numbers refer to the orifice size (hole).When replacing your tips it's important that you know the GPM and PSI of your machine. Too small and you could potentially damage your machine's pump. Too large and you will not get optimal pressure. Use the nozzle chart to find the correct size.

1/8 Meg Nozzle 40° Stainless Steel 1/8 Meg Nozzle 40° Stainless Steel
1/8 Meg Nozzle 40° Stainless Steel from $7.20

1/8" Stainless Steel Meg Nozzle 40° Our stainless steel Meg tips provides a solid 40 degree spray pattern that delivers precision accuracy and powerful impact. Reliable cleaning power for a variety of hard surfaces. A high-impact spray pattern means more impact per unit area and faster wash times. MEG spray nozzles are made with hardened stainless steel that is ideal for high-pressure use and has a long wear life. They have an internal e vane that stabilizes vibrations and provides a uniform spray distribution. This MEG tip has a 1/8" NPT inlet, a maximum pressure of 3000 PSI, and a 40° spray pattern. Size: Inlet: 1/8" male NPT Length: 7/8" Hex: 1/2" Details: Spray pattern: 40° Maximum pressure: 3000 PSI Material: Hardened stainless steel Pressure wash spray nozzles are really an integral part of your power wash system. Nozzles come in different shapes, sizes, and styles. Nozzles should have a number that is stamped on the nozzle, which indicates the spray angle and orifice size.  The first two digits of the nozzle number indicate the spray angle (disperse) in degrees. The remaining numbers refer to the orifice size (hole).When replacing your tips it's important that you know the GPM and PSI of your machine. Too small and you could potentially damage your machine's pump. Too large and you will not get optimal pressure. Use the nozzle chart to find the correct size.

2

1/8" tips are used in surface cleaners, duct spinners, etc. We offer these nozzles by Spraying Systems because they are built with an internal diffuser that controls the accuracy of the flow through the nozzle perfectly. The orifices are specially hardened stainless for long life.

If you are changing the tips on your surface cleaner, you can use the standard nozzle chart to determine the best size to order.

The PSI output of your machine is equal at every nozzle, but your total GPM output is divided by the number of nozzles on your surface cleaner. If you have a 4000 PSI, 4 GPM pressure washer and a 2-nozzle surface cleaner, look on the nozzle chart for the intersection of 4000 PSI and 2 GPM (4 GPM / 2 nozzles). You would use a 2.0 orifice size for this set-up.

Rated to 5000 PSI.