click tracking

Wayne Burner, Parts-Hot Water Pressure Washers


Wayne Burner Fuel Gun Assembly Pressure Washer PartWayne Burner Fuel Gun Assembly Pressure Washer PartAn electrode assembly is composed of three parts, the electrode, the insulator and the palnut. The electrode is a metal rod that is threaded on one end and bent or curved on the other end. Two of these rods are paired and curved toward each other so that electrical arcing will occur at and only between the tips of the rods. Each electrode rod is inserted through a ceramic insulator. The insulator prevents arcing between the back portions of the rod and other metal components.

A special nut called a palnut is screwed into the electrode rod, preventing the insulator from sliding off.


Availability: Usually ships the same business day

4136$95.42
Wayne Burner Fan Housing Assembly Pressure Washer PartWayne Burner Fan Housing Assembly Pressure Washer Part6.25"


Availability: Usually ships the same business day

1430$90.44
Wayne Burner Tune Up Kit Pressure Washer PartWayne Burner Tune Up Kit Pressure Washer Part

Availability: Usually ships the same business day

1435$43.02
Wayne Burner Electrodes 2 Pack Pressure Washer PartWayne Burner Electrodes 2 Pack Pressure Washer PartThe electrode provides the elctric spark to ignite the fuel nozzle. The electrode is a metal rod that is threaded on one end and bent or curved on the other end. Two of these rods are paired and curved toward each other so that electrical arcing will occur at and only between the tips of the roda. The electroded are inserted through a ceramic insulator . the insulator prevents arcing between the back portions of the rod and other metal components.


Availability: Usually ships the same business day

1429$20.52
Wayne Burner Blower Wheel 3.44 X 5 1/4 Model E Pressure Washer PartWayne Burner Blower Wheel 3.44 X 5 1/4 Model E Pressure Washer PartIn a forced draft, pressure atomizing gun type oil burner, air is moved to the combustion area by a blower mounted inside of the burner housing. The squirrel cage blower is directly driven by the burner motor. Air enters the blower through bands, an outer and an inner, which may be moved to control the amount of air which may be moved by the blower. Air adjustments should be relatively permanent and should not change unless the conditions in which the burner operates change.


Availability: Usually ships the same business day

1425$21.49
Wayne Burner Blower Wheel 6 1/4 X 4 Model E Pressure Washer PartWayne Burner Blower Wheel 6 1/4 X 4 Model E Pressure Washer Part

Availability: Usually ships the same business day

1426$27.49
Wayne Burner Large Standard Gasket Pressure Washer PartWayne Burner Large Standard Gasket Pressure Washer Part

Availability: Usually ships the same business day

1431$5.37









YSitemap

Wayne Burner, Parts-Hot Water Pressure Washers