| || |
REMOVE DECK STRIPPER HAS A NEW FORMULA!!!
This deck stain remover is designed to easily remove sealer or stain from a deck or other wood surface. REMOVE and SEVERE STRIP deck stripper are well-known as some of the most cost effective and best strippers in the pressure washing industry. Try some of this amazing deck stain remover and stripper to remove stubborn finishes today!
This super-concentrated deck stripper is great for oil-based wood sealers, stains and oil-based paints. It is about 30% stronger than the previous formula, with even lower sudsing. One small container makes up to 5 gallons of deck stripper (depending on job needs). It provides coverage of +/- 150 sqaure feet per gallon. You will cut your time when removing failed stains and sealers and make more money with this unique deck stripper!
Performing deck cleaning is one of the most popular and rewarding services performed by power wash contractors today. The most important factor in deck cleaning is surface preparation. Great surface preparation is the KEY to outstanding results. Prep right, and the deck will turn out GREAT. Rush through prep or use the wrong deck cleaners to save money and/or time, and the deck won’t look nearly as good.
Thorough cleaning of the deck or fence is essential to get good results. If the wood was previously sealed, you must strip off the old sealer with a deck stripper rather than just clean the wood. If any old sealer remains, it might interfere with the new sealer soaking into the wood. If the wood has not been sealed within the last five years, a deep cleaning is probably all that is needed. If you are not sure if the deck or fence must be stripped, a simple “splash” test is all you need to find out. Sprinkle a little water from your fingertips on to the dry wood. If the droplets soak into the wood right away, you don’t need to strip. If they form little droplets on the surface, you do have to strip.
Before applying a deck stain remover - stripper to the deck, wet down the adjoining surfaces (such as plants, lawn, or house siding) with a hose. Minimize any water landing on the wood to be cleaned. Consider shielding plants and house siding with drop cloths to prevent contact with the detergent. Also use appropriate safety gear when stripping and make sure you read the directions on the label.
Use the pressure washer to “rinse” the surface. Avoid holding the nozzle too close to the wood or holding it in any one spot too long. Hold the pressure wand about 8” away from the wood and “sweep” it off in a rinsing motion. Use a “golf swing” motion, and avoid washing each square inch of the wood. Keep the wand moving smoothly over the surface to avoid leaving marks on the wood. Proper technique determines the results, so take some time to practice when you are able to.
Once the entire surface has been washed (and is still wet, but without puddles) apply Wood Britener to the wood with your Deckster Deck Sprayer . This will neutralize the pH of the wood and brighten it. You may let Wood Britener dry on the wood overnight without rinsing it off.
The wood is now clean, and it needs to thoroughly dry before it can be sealed (at least a day or two). As the wood dries, you will see a bright, clean, new-looking surface. Now your ready to seal the deck with Ready Seal Deck Sealer, one of the most popular deck sealers in the country for contractors!
Roof And House Wash
Roofster Gas Powered Roof Cleaning Equipment For Roof Cleaning
Our Sale Price: $1,679.00
Remove Deck Stain Remover-Stripper The Best Deck Stain-Sealer Remover For DIY 12Oz Pkgs
For Telephone Orders Call 301-519-9274
Copyright ©2015, All Rights Reserved Sun Brite Supply Of Maryland 16620 Oakmont Avenue Gaithersburg, MD 20877