Take advantage of these inexpensive time savers!
|Roll Over Nozzle Holder Pressure Washer PartSwitch between high and low pressure by just rolling over. Rated to 300 degrees, 8 GPM, and 3600 PSI.|
|Adjustable Nozzle Holder Pressure Washer PartTurn your pressure washer from high pressure to low pressure with the twist of this knob. Holder closes to allow steady stream of high pressure through a standard 1/4 meg mpt nozzle. Twist the knob and water is redirected around the nozzle to drop the pressure to allow chemical injection.|
Rated to 300 degrees, 8 GPM, 3650 PSI.
|Adjustable Nozzle Holder Pressure Washer PartTwist the nozzle holder to switch between high and low pressure. In the low pressure position, water is dumped around the nozzle to lower the pressure. Makes a single lance wand perform just like a dual-lance.|
Rated to 300 degrees, 8 GPM, and 3000 PSI.
|Nozzle Unclogger Tool Pressure Washer PartQuality nozzle unclogger with protective screw cap. Constructed of brass and has a 1/4 QC plug base. Quickly cleans material from nozzle orifice, extending the nozzle life.|