click tracking

General Pump T Series 47 Solid Shaft Pumps Series 66 High Flow Triplex Pumps For Belt-Driven Equipment

This is the preferred pump chassis in the pressure cleaning industry! This is a proven design with more than 30 years of history.

Forged brass manifold with a lifetime warranty
Over-size connecting rods for maximum life
Solid ceramic plungers with continuously lubricated packings
Unitized SS inlet and discharge valves
Crankcase capacity: 40.6 ounces
Max temperature: 165°
Inlet: 1/2" FPT
Discharge: 3/8" FPT

The Series 66 High Flow models feature longer-lasting seals and a new valve cap design for stronger high-flow performance.

All of the following pumps are intended for belt-driven machines. Each pump is rated in PSI and GPM at a certain RPM for that pump. Some pumps may be run at one of two or three different speeds, resulting in different outputs. Your pulley arrangement will determine the final RPM of the pump. You may need to change your pulleys to achieve the proper RPM for the pump you select.

All of the pumps listed below are similar in appearance to the picture on the top of this page. All of the pumps below have a 24 mm shaft for mounting a pulley. All of the pumps below come with mounting rails, too.